Timer Function - Coffeemaxx Z 01113 Gebrauchsanleitung

9. Press the An / Aus button to switch on the device. The An / Aus button lights up.
10. As soon as you have pressed the An / Aus button, the brewing procedure begins.
11. After the brewing procedure, you can take the glass pot from the hotplate and serve
the coffee.
12. After the brewing procedure, the hotplate remains on for another 40 minutes and
then switches off automatically.
13. If you would like to turn off the coffee machine before the 40 minutes are up, press
the An / Aus button.
14. Clean the device after use as described in the "Care and Descaling" chapter.
The coffee machine has a non-drip valve. You can also take the glass pot from the
hotplate during the brewing procedure and pour yourself a cup of coffee. But be
careful: You should place the glass pot back on the hotplate within 20 seconds to
prevent the coffee fi lter from overfl owing with water!

Timer Function

The coffee machine has an automatic coffee brewing function. You can select a starting
time at which the coffee machine automatically starts the brewing procedure. To do so,
take the following steps.
1. Fill the coffee machine as described in the "Brewing Coffee with Freshly Ground
Beans" and "Brewing Coffee with Powder Coffee" sections according to whether you
would like to brew coffee with freshly ground beans or with powder coffee.
2. You should now set the starting time at which the coffee machine automatically
starts the brewing procedure by pressing the Programm
the Programm
de and Minute
3. Press the Programm button again to confi rm your entry. The Programm button will
now light up without fl ashing.
4. The current time then appears on the display again.
5. The brewing or grinding procedure now starts at the set time.
Tip: You can also start the grinding or brewing procedure at any time before the set
starting time. To do this, press the Programm button once to switch off the timer
and then press the An / Aus button to start the grinding or brewing procedure ma-
nually.
6. After the brewing procedure, you can take the glass pot from the hotplate and serve
the coffee.
7. After the brewing procedure, the hotplate remains on for another 40 minutes and
then switches off automatically.
8. If you would like to turn off the coffee machine before the 40 minutes are up, press
the An / Aus button.
9. Clean the device after use as described in the "Care and Descaling" chapter.
01113_DE-GB-FR-NL_V11.indb 23 01113_DE-GB-FR-NL_V11.indb 23
button fl ashes. Now set the automatic starting time using the Stun-
buttons.
23
button
EN
for 3 seconds until
10.02.2016 10:53:17 10.02.2016 10:53:17