Brewing Coffee With Powder Coffee - Coffeemaxx Z 01113 Gebrauchsanleitung

EN
5. Place the fi lter compartment insert and the permanent fi lter into the fi lter compart-
ment. Make sure that all parts are placed in correctly as otherwise the coffee machi-
ne will not start the brewing procedure.
6. Close the fi lter compartment.
7. Fill coffee beans into the grinding mechanism of the coffee machine. Then place the
lid of the grinding mechanism back on.
8. Place the glass pot on the hotplate.
9. Use the 2–12 Tassen button to set the number of cups you would like to brew.
10. You can press the Kaffeestärke button to set the coffee strength. You have
a choice of three levels which are shown to you on the display as follows:
The level mild represents a mild coffee fl avour, the level medium represents a me-
dium coffee fl avour and the level strong represents an aromatically strong coffee
fl avour.
11. Press the An / Aus button to switch on the device. The An / Aus button lights up.
12. As soon as you have pressed the An / Aus button, the grinding procedure begins.
After the grinding procedure, the brewing procedure starts immediately.
13. After the brewing procedure, you can take the glass pot from the hotplate and serve
the coffee.
14. After the brewing procedure, the hotplate remains on for another 40 minutes and
then switches off automatically.
15. If you would like to turn off the coffee machine before the 40 minutes are up, press
the An / Aus button.
16. Clean the device after use as described in the "Care and Descaling" chapter.
The coffee machine has a non-drip valve. You can also take the glass pot from the
hotplate during the brewing procedure and pour yourself a cup of coffee. But be
careful: You should place the glass pot back on the hotplate within 20 seconds to
prevent the coffee fi lter from overfl owing with water!

Brewing Coffee with Powder Coffee

1. Open the water reservoir cover.
2. Fill the desired amount of water into the water reservoir. On the water level indication,
you can see how many cups of water you have already fi lled in the water reservoir.
Always fi ll the water reservoir with at least two up to a maximum of 12 cups of water.
3. Then close the water reservoir cover.
4. Open the fi lter compartment by pressing the unlocking button on the side of the
device.
5. Place the fi lter compartment insert and the permanent fi lter into the fi lter compart-
ment. Make sure that all parts are placed in correctly as otherwise the coffee machi-
ne will not start the brewing procedure.
6. Pour the coffee powder into the permanent fi lter and close the fi lter compartment.
7. Place the glass pot on the hotplate.
8. Press the Mahlen Aus button to switch off the grinding mechanism of the coffee
machine. The Mahlen Aus button lights up.
01113_DE-GB-FR-NL_V11.indb 22 01113_DE-GB-FR-NL_V11.indb 22
22
10.02.2016 10:53:16 10.02.2016 10:53:16