Troubleshooting; Technical Data - Coffeemaxx JK40401 Gebrauchsanleitung

Troubleshooting

If the device should stop working properly, fi rst check whether you are able to correct the
problem yourself. Otherwise, contact our customer service department.
Do not try to repair a faulty device yourself!
Problem
The device does not
work.
The espresso does
not trickle into the
espresso pot.
Espresso escapes
during the brewing
process.

Technical Data

Model:
Article number:
Voltage supply:
Power:
Protection class:
Possible cause/solution
• Is the plug inserted in the mains socket correctly?
• Is the plug socket defective? Try another plug socket.
• Check the fuse of your mains connection.
• Is the device switched on? Move the On/Off switch to the 1
position to switch on the device.
• Is water in the water reservoir? Fill the water reservoir with
water.
• Is espresso powder in the sieve? The device does not work
without espresso powder! Fill espresso powder in the sieve.
• Is the sieve clogged up? The espresso powder may be too fi nely
ground and may be blocking the espresso sieve. Use espresso
powder with a medium grinding fi neness.
• Have you pressed the espresso powder too hard into the sieve
insert? Make sure that you do not press down on the powder
when removing excess espresso powder!
• Are the water reservoir and espresso pot screwed together
correctly? Make sure that the espresso pot is seated correctly.
• Is the rubber seal in the espresso pot porous? Replace the rub-
ber seal.
JK40401
Z 02609
220 – 240 V~ 50 Hz
480 W
II
20