Herunterladen Inhalt Inhalt Diese Seite drucken

Intended Use; Installation - Scheppach CRS100-20Li Original Bedienungsanleitung

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 1
• Always take heed of the applicable safety instruc-
tions as well as the environmental protection regu-
lations and information.
• The warranty excludes all defects caused by im-
proper handling.

9. Intended use

The equipment is to be used only for its prescribed
purpose. Any other use is deemed to be a case of
misuse. The user / operator and not the manufactur-
er will be liable for any damage or injuries of any kind
caused as a result of this.
To use the equipment properly you must also observe
the safety information, the assembly instructions and
the operating instructions to be found in this manual.
All persons who use and service the equipment have
to be acquainted with this manual and must be in-
formed about the equipment's potential hazards.
It is also imperative to observe the accident preven-
tion regulations in force in your area.
The same applies for the general rules of health and
safety at work.
The manufacturer will not be liable for any changes
made to the equipment nor for any damage resulting
from such changes.
The machine may be used only with original acces-
sories and original tools of the manufacturer.
The safety-, workplace- and maintenance specifica-
tions of the manufacturer as well as the dimensions
specified in the technical data must be observed.
Please note that our equipment has not been de-
signed for use in commercial, trade or industri-
al applications. Our warranty will be voided if the
equipment is used in commercial, trade or industrial
businesses or for equivalent purposes.

10. Installation

m IMPORTANT!
You must fully assemble the appliance before
using it for the first time!
To ensure that the Li battery pack provides long ser-
vice you should take care to recharge it promptly.
You must recharge the battery pack when you notice
that the power of the cordless equipment drops.
Removing/inserting the battery
1. To remove the battery (11) from the appliance,
press the release button (12) on the battery and
pull out the battery.
2. To insert the battery (11), place it on the guide
track and push it back into the appliance. It will
audibly snap in.
 www.scheppach.com  service@scheppach.com  +(49)-08223-4002-99  +(49)-08223-4002-58
Used batteries
• If a fully recharged battery lasts for considerably
shorter operating times, the battery is used up and
needs to be replaced. Only use an OEM battery
pack replacement available from our Customer
Service.
• Always take heed of the applicable safety instruc-
tions as well as the environmental protection regu-
lations and information (see "Waste Disposal and
Environmental Protection").
Assembly
Only insert the rechargeable battery when the
device is completely assembled. If the device is
switched on accidentally, there is a danger of in-
jury.
Installing/changing the blade
• Always wear protective gloves when handling the
saw blade in order to avoid cutting yourself.
Caution, risk of injury!
• Do not use any blunt or bent blades or blades
which are damaged in any other way..
• Always insert a suitable saw blade.
Installing the blade:
1. Turn the chuck ring (4) in the direction of the arrow
and insert the shank of the saw blade (1) all the
way into the slot of the saw blade holder (3).
2. To lock, turn the chuck ring (4) back to the starting
position.
3. Check that the saw blade is secure by pulling on
it.
Removing the saw blade:
4. Turn the chuck ring (4) in the direction of the arrow
and pull the blade out of the saw blade holder.
For certain work, the saw blade can also be inserted
after turning through 180°.
Operation
When working with the device, always wear suit-
able clothing and appropriate protective equip-
ment. Prior to each use it must be ensured that
the device is working correctly. Personal protec-
tive equipment and a fully functional device re-
duce the risk of injuries and accidents.
After the device has been switched off, the blade
continues moving for some time. Do not touch
the moving blade and do not attempt to brake it.
Danger of injury!
Switching on and off
Ensure your stance is stable and hold the device
tightly with both hands and away from your body. Be-
25 | GB

Werbung

Inhaltsverzeichnis

Fehlerbehebung

loading

Inhaltsverzeichnis