Silvercrest SHFD 1650 A1 Bedienungs- Und Sicherheitshinweise Seite 13


Insert the mains plug into a socket that is always easily accessible. A beep sounds twice.

Press "On/standby" (13) to switch on the air fryer. Each touch operation is confirmed by a
beep.

The temperature (9) is at 180°C. Set the desired temperature (9) in steps of 5°C by pressing
"Increase temperature" (11) or "Reduce temperature" (12). To start the progress of numbers,
you can keep the button "Increase temperature" (11) or "Reduce temperature" (12) pressed.

The timer (17) is set for 15 minutes. Set the desired time by pressing "Reduce minutes" (19) or
"Increase minutes" (20). To start the quick progress of numbers, you can keep the button
"Reduce minutes" (19) or "Increase minutes" (20) pressed.

Press "Start/pause" (16) to start the heating process. The timer (17) indicates the remaining
minutes. The symbols fan (14) and heating (15) are displayed in animated form in operating
mode. If the set temperature (9) has been reached, the heating (15) symbol lights up
continuously. You can pause the heating process by pressing "Start/pause" (16) and restart it
by pressing the button again.

The air fryer switches off automatically upon expiry of the time indicated by the timer (17) and
a beep sounds several times.

Then remove your food by lifting up the pan (4) by the handle (6).
There is a risk of burns! Do not touch the pan (4), basket (3)
or the inside of the air fryer directly.

Place the pan (4) on a flat, heat-resistant surface.

Slide the cover to one side, and then press the release button (5) to detach the basket (3) from
the pan (4). Now place the food in a bowl or on a plate.

The air fryer switches automatically to standby mode after a short time. You can also set the air
fryer to standby mode by pressing "On/standby" (13).

Clean the air fryer as described in the section "Cleaning".
Some food should be shaken halfway through the cooking time to ensure that it is cooked
evenly. To do so, lift the pan (4) and basket (3) by the handle (6) from the air fryer and shake
the food. Then reinsert the pan (4) and basket (3) into the air fryer. The air fryer switches itself
off automatically when you remove the pan (4) and basket (3). Once the pan (4) and basket
(3) are correctly reinserted, the air fryer switches itself on again automatically until the timer
(17) expires.
If you are cooking food that should be shaken halfway through the cooking time, you can also
set the timer (17) to half the cooking time. Thus a beep sounds when you need to shake the
SilverCrest SHFD 1650 A1
English - 11