Before First Use - Unold 48356 onyx Bedienungsanleitung

plates.
16. Always use the appliance on a level, unclutte-
red and heat-resistant surface.
17. Make sure that the lead cable does not hang
over the edge of the worktop or table, since
this can cause accidents, for example if small
children pull on the cable.
18. Route the lead cable so that it is prevented
from being pulled or tripped over.
19. Always disconnect the lead cable from the
wall socket pulling on the plug, never on the
cable.
20. Never carry the appliance by the lead cable.
21. Use the appliance only indoors.
22. Touch the appliance only on the handle in or-
der to avoid burns.
23. Never fill the appliance with more than the in-
dicated amount dough to avoid spilling.
24. To prevent injuries, do not move the appliance
as long as it is in operation.
25. Do not use the appliance with accessories of
other manufacturers or brands, to prevent da-
mage.
The manufacturer does not assume any warranty in case of improper, incorrect or commercial use
or after repair by unauthorized third parties.

Before firST uSe

1. Before assembling the appliance remove all
packing materials.
2. Check if all parts are complete.
3. Wipe the removable parts with a damp cloth
or clean it in warm soapy water. Dry the parts
carefully
4. Wipe the housing with a damp cloth. Make
sure that no water can penetrate into the hou-
sing.
5. Put the plug into a socket.
uSe of The APPLiAnce
1. Attach the set of plates which you intend to
use by pressing the plates into the hinge. The
sliding holders will slightly move to the front.
2. Put the plug into the socket (power supply
230 V). and turn the temperature button to
the desired position between MIN and MAX.
The red control lamp turns on and keeps on
lighting as long as the appliance is connected
26. Disconnect the appliance from the wall socket
after use and prior to cleaning. Never leave
the appliance unattended when it is connec-
ted to the wall socket.
27. Let the appliance cool off before cleaning it.
28. Never open the casing of the appliance to pre-
vent electric shock.
29. Check the appliance, the wall socket and the
lead cable regularly for wear or damage. In
case the lead cable or other parts present
damages, please send the appliance or the
base to our after sales service for inspection
and repair (for address, see warranty terms).
Unauthorised repairs can constitute serious
risks for the user and void the warranty.
Attention:
The surfaces of the appliance be-
come hot during operation. Please
use only the heat insulated handle
to open and close the appliance.
6. Grease the plates slightly and preheat the
empty appliance for about 10 minutes. Then
wipe the plates with a damp cloth.
7. The first toast / waffle should not be used and
should be thrown away.
8. For further used the plates must not be
greased any more (except if provided in the
recipe).
9. The appliance is now ready for being used.
to the power.
3. Use the preheating phase of the Multi 3 in
1 (approx. 5 minutes) to prepare the ingre-
dients.
4. As soon as the required temperature is
reached, the green control lamp turns on. This
lamp will always turn on, when the required
temperature is reached and turns off, when
13