Eliwell ICPlus 902/A Bedienungsanleitung Seite 21

PAR. DESCRIPTION
Baudrate selection.
bAU
48 (0) = 4800; 96 (1) = 9600; 192 (2) = 19200; 384 (3) = 38400.
Pty Modbus parity bit. n (0) = none; E (1) = even; o (2) = odd.
StP Modbus stop bit. 1b (0) = 1 bit; 2b (1) = 2 bit.
DISPLAY (folder 'diS')
LOCk. Setpoint edit lock. The parameter programming menu can still be
LOC accessed, and the settings changed, which means also that the status of this
parameter can be changed so as to unlock the keypad. n (0)= no; y (1) = yes.
Password 1. When enabled (PS1 ≠ 0) it is the password to the 'User'
PS1
parameters (User).
Password 2. When enabled (PS2 ≠ 0) it is the password to the 'Installer'
PS2
parameters (Inst).
Display values with decimal point. n (0) = no (without decimal point);
ndt
y (1) = yes (with decimal point); int (2) = integer (V/I models only).
Calibration 1. Positive or negative temperature value added to the value read by
CA1
Pb1, according to the setting of parameter CAI.
Intervention of the offset on display, temperature control or both.
0 = only the temperature shown is modified;
CAI 1 = sum with only the temperature used by the controllers and not for the
display, which remains unchanged;
2 = sum with the displayed temperature, which is also used by the regulators.
LdL Minimum value that can be displayed by the device.
HdL Maximum value that can be displayed by the device.
dro Select the unit of measurement of probe 1. C (0) = °C, F (1) = °F
MODEL
ALL
ALL
ALL
ALL
ALL
ALL
ALL
ALL
ALL
NTC/PTC
PT100-Tc
NTC/PTC
PT100-Tc
ALL
21
RANGE VALUE M.U. LEVEL
48/96/
96 num
192/384
n/E/o E num
1b/2b 1b flag
n/y n flag
0...250 0 num User/Inst
0...250 15 num
n/y/int n num User/Inst
-30.0...30.0 0.0 °C/°F User/Inst
0/1/2 2 num
-199.9...HdL -50.0
°C/°F
-328...HdL -199.9
LdL...199.9 140.0
°C/°F
LdL...1350 1350
C/F C flag
Inst
Inst
Inst
User/Inst
Inst
Inst
Inst
Inst
Inst