Introduction; Intended Use; Depicted Components; Package Contents - Parkside PBS 900 C3 Originalbetriebsanleitung

BELT SANDER PBS 900 C3

Introduction

Congratulations on the purchase of your new ap-
pliance . You have selected a high-quality product .
The operating instructions are part of this product .
They contain important information about safety,
usage and disposal . Before using the product, please
familiarise yourself with all operating and safety
instructions . Use the product only as described and
for the range of applications specified . Please also
pass these operating instructions on to any future
owner .

Intended use

The belt sander is designed for the dry surface
sanding of wood, plastic, metal and plaster and
painted surfaces (depending on the type of sand-
paper used) . The appliance may only be used
for dry sanding . Please note that you need to use
appropriate abrasive belts with different grains for
working different materials, and that you may need
to adapt the speed to suit the material . The appli-
ance is not intended for commercial use . Any other
uses of or modification to the appliance is deemed
to be improper and carries the risk of serious per-
sonal injury . The manufacturer accepts no responsi-
bility for damage(s) attributable to misuse .

Depicted components

Speed preselector wheel
Lock button
ON/OFF switch
Drive belt cover
Extraction nozzle
Adjustment screw for belt tracking
Additional handle
Ventilation slits
Clamping lever
Dust collector
Dust extraction adapter
Reducer
Screw clamps 2 x
■ 26 │ GB │ MT

Package contents

Check the package contents immediately
after unpacking the appliance:
1 belt sander PBS 900 C3
1 abrasive belt
1 dust collector
1 dust extraction adapter and reducer
(for external dust extraction)
2 screw clamps
1 set of operating instructions

Technical details

Rated voltage:
Rated power
consumption:
Idling belt speed:
Rated idling speed:
Abrasive belt:
Protection class:
Noise emission value:
Noise measurement value determined in accordance
with EN 62841 . The A-rated noise level of the tool
is typically:
Sound pressure level:
Uncertainty:
Sound power level:
Uncertainty:
Wear hearing protection!
Total vibration value:
Total vibration values (vector total of three direc-
tions) determined in accordance with EN 62841:
Vibration emission value:
Uncertainty K = 1 .5 m/s
230 V ∼ 50 Hz
(alternating current)
900 W
240–400 m/min
n 450–750 rpm
0
75 x 533 mm
II / (double insulation)
L = 85 dB(A)
pA
K = 3 dB
pA
L = 96 dB(A)
WA
K = 3 dB
WA
a ≤ 6 .6 m/s
2
h
2
PBS 900 C3