Introduction; Intended Use; Features; Package Contents - Parkside PEXS 270 C3 Originalbetriebsanleitung

ORBITAL SANDER PEXS 270 C3

Introduction

Congratulations on the purchase of your new tool.
You have chosen a high-quality product.
The operating instructions are part of this product.
They contain important information about safety,
usage and disposal. Before using the product,
please familiarise yourself with all operating and
safety instructions. Use the product only as de-
scribed and for the range of applications specified.
Please also pass these operating instructions on to
any future owner.

Intended use

This tool is intended for dry sanding wood, metal
and paintwork. Any other usage of or modification
to the tool is deemed to be improper and carries
the risk of serious personal injury. The manufacturer
accepts no responsibility for any damage attributable
to misuse. This tool is not intended for commercial
use.

Features

1 ON/OFF switch
2 Dust collector
3 Sanding pad
4 Sanding sheet
5 Speed control
6 Exhaust nozzle
7 Adapter for external vacuum extraction
8 Release button
■ 2 │ GB │ IE

Package contents

1 orbital sander PEXS 270 C3
1 dust collector
1 sanding sheet (grain size 120)
1 adapter for external vacuum extraction
1 reducer
1 set of operating instructions
Technical specifications
Nominal voltage
Nominal power
No-load vibration
frequency
Idle speed
Sanding pad
Protection class
Noise and vibration data
Noise measurement value determined in
accordance with EN 62841. The A-rated
noise level of the power tool is typically:
Sound pressure level
Uncertainty
Sound power level
Uncertainty
Wear ear muffs!
Vibration values (vector total of three directions)
determined in accordance with EN 62841:
Vibration emission value
Uncertainty
230 V ∼, 50 Hz (AC)
270 W
n 14000–24000 rpm
0
n 7000–12000 rpm
0
Ø 125 mm
II / (double insulation)
L = 79 dB (A)
pA
K = 3 dB
L = 90 dB (A)
WA
K = 3 dB
Max. a = 9.7 m/s
h, W
K = 1.5 m/s
PEXS 270 C3
2
2