Cleaning The Floor Nozzle (Turbo Brush) - hanseatic VC-PD510 Gebrauchsanleitung

Page EN-24 Care and maintenance
(13)
2. Pull back the slider (42) on the
underside of the soft floor noz-
zle (13).
3. Remove the locking latch (43).
(13)
4. Remove the roller (44).
5. Remove any lint and hair from
the roller (44).
(43)
(42)
6. Reinsert the roller (44) and the
locking latch (43). The locking
latch must 'click' into place.
Cleaning the floor
nozzle (turbo brush)
Risk of injury!
(44)
Improper handling of the ap-
pliance may result in injury.
Never touch moving parts
■
of the appliance and acces-
sories, e.g. the fl oor brush.
There is a risk of fi ngers be-
coming trapped.
Always remove the fl oor
■
brush from the telescopic
tube or suction hose before
cleaning.
CAUTION
(43)
(44)