hanseatic VC-PD510 Gebrauchsanleitung Seite 48

Page EN-14 Start-up
(23)
Make sure that the connector
pins (23) slide into the open-
ings (24).
(14) (25) (26)
3. Select a nozzle, e.g. the floor
nozzle (turbo brush) (14), and
insert the connector (25) of
the floor nozzle (14) into the
opening (26) on the tube ex-
tension (11).
Make sure that the connector
pins (23) slide into the open-
ings (24).
All filters have already been in-
serted at the manufacturing plant.
Your vacuum cleaner is now ready
(24)
to use.
(11)
You can also attach all
nozzles to the appliance
directly.