Cleaning The Soft Floor Nozzle - hanseatic VC-PD510 Gebrauchsanleitung

NOTICE
Risk of damage!
Improper cleaning of the
appliance can impair the
surface.
Do not use any abrasive
■
cleaners (scouring or thin-
ning agents) to clean the
appliance.
• Wipe
– the housing,
– the accessories
with a damp cloth as required.
Never allow liquid to penetrate
the vacuum cleaner.
(41)
• Occasionally clean the air
vent (41) on the right-hand
side of the appliance with a
soft brush.
Care and maintenance Page EN-23
Cleaning the soft floor
nozzle
CAUTION
Risk of injury!
Improper handling of the ap-
pliance may result in injury.
Never touch moving parts
■
of the appliance and acces-
sories, e.g. the fl oor brush.
There is a risk of fi ngers be-
coming trapped.
Always remove the fl oor
■
brush from the telescopic
tube or suction hose before
cleaning.
• Vacuum the underside of the
soft floor nozzle (13) now and
then with the crevice noz-
zle (15).
If the soft floor nozzle (13) is no
longer working properly:
1. Remove the floor soft noz-
zle (13) from the tube exten-
sion (11) or from the suction
tube (8).