hanseatic VC-PD510 Gebrauchsanleitung Seite 59

• Vacuum the underside of the
floor nozzle (turbo brush) (14)
now and then with the crevice
nozzle (15).
If the floor nozzle (turbo
brush) (14) is no longer working
properly:
1. Remove the floor nozzle (turbo
brush) (14) from the tube ex-
tension (11) or from the suction
tube (8).
(14)
2. Push the slider (45) on the
underside of the floor noz-
zle (turbo brush) (14) to the
'Open' position (towards the
symbol).
Care and maintenance Page EN-25
3. Remove the locking latch (46).
(45)
4. Remove the brush (18).
5. Remove any lint and hairs
from the brush (18).
6. Reinsert the brush (18) and
the locking latch (46) and
move the slider (45) to the
"Closed" position (towards the
symbol).
(46)
(18)