Reloop RMP-1 SCRATCH MK2 B Bedienungsanleitung Seite 21

17. Sampler button
To activate the sample mode, press the Sampler button -17-.
NOTE: There are two different sample play modes: An Endless mode and a One Shot mode. The
Endless mode is activated by pressing the Sampler button - 17 - once; the sampler lED is conti-
nually illuminated. In Endless mode the sample is played endlessly in a loop. The One Shot mode is
activated by pressing the Sampler button - 17 - twice. The sampler lED flashes. In One Shot mode
the sample is triggered once. If the Sample mode has been activated, the loops previously stored
in the sample banks 1 to 4 can be played simultaneously while playing back the CD.
18. Jog wheel
Your CD player features an extra large Jog Wheel for a real vinyl-like operation. The wheel is ge-
nerally divided into two sections for scratch applications. The center section is touch sensitive and
responds to the body's own electricity- similar to a vinyl record on the turntable. The outer rubbe-
rized section has been designed for pitch bending - similar to the edge of a turntable's platter. If
the Scratch function -10- has been deactivated, the entire Jog Wheel also works as a Search and
Pitch Bend wheel. By turning clockwise and counterclockwise while in Cue and Pause mode, you can
precision-frame-search (1/75 min.) a Cue Point. While in Play mode, use the Jog Wheel, similar to a
turntable, for pitch bending (during deactivated Scratch -10-). This is a quick increase (push start) or
decrease (stop) of the pitch. The faster the Jog Wheel is turned, the quicker the change of pitch. The
same effect can be achieved with the Pitch Bend buttons -24-.
19. Open/Close button
Press in Pause/Cue mode the Open/Close button -19- to open the CD tray and insert a CD. Press the
Open/Close button -19- once more to close the tray. The Status LED above tray flashes while loading.
As soon as the CD is loaded the Status LED stops flashing. Your CD-Player is ready now.
CAUTION: Do not try to close the CD tray manually - you could break the mechanism.
20.Pitch range button
Press the Pitch Range button -20- to select between a pitch range of +/- 4%, +/-8%, +/-16% or +/-100%.
21. Key lock button
When activating the Key Lock function with the button -21- the track's original tone pitch, regardless
of the set pitch, is maintained. Press the button a second time to deactivate the Key Lock function.
22.Pitch Fader
Use the Pitch Fader -22- to infinitely change the pitch of the track within the selected range. The
difference from the original pitch is shown on the display -11- in per cent. Variations in the +/-4%
and +/-8% ranges are effected in steps of 0,05%, in the +/-16% range in steps of 0.1% and in the
+/-100% range in steps of 1%.
23. Pitch On/Off button
De-/Activate the Pitch Fader using the Pitch On/Off button -23-.
24. Pitch Bend buttons
Use the Pitch Bend buttons -24- to briefly change the pitch of the respective track by +4/8/16% (+
button), or by -4/8/16% (- button) by holding it. Release the button for the player to return to the
pitch set with the Pitch Fader
25.relay/Fader Start Connection hub
When connecting your player via the connection hub -25- with another Reloop CD player (which
also features a Relay/Fader Start connection hub) with the enclosed 3.5 jack cord, Relay Play is
available. For this, select the Single Play mode on both players, using the Single/Continue buttons
-8-. Both displays read „Single". Then activate the Play mode on one of the players with the Play/
Pause button -2-. The first track is played; the player then goes into Pause mode. The first track of
the other player is then played; then this player goes into Pause mode. After that, the second track
of the first player is played, etc.
21