Safety Instructions - Reloop RMP-1 SCRATCH MK2 B Bedienungsanleitung

OPeRATiOn MAnUAl
CAUTiOn! For your own safety, please read this operation manual carefully before initial operati-
on! All persons involved in the installation, setting-up, operation, maintenance and service of this
device must be appropriately qualified and observe this operation manual in detail. This product
complies with the requirements of the applicable European and national regulations. Conformity
has been proven. The respective statements and documents are deposited at the manufacturer.
Congratulations on purchasing your Reloop RMP-1 Scratch MP3-CD player. Thank you for placing
your trust in our disc jockey technology. Before operating this equipment we ask you to carefully
study and observe all instructions.
Please remove the RMP-1 Scratch from its packaging. Check before initial operation to make sure
that the device did not suffer any visible damage during transport. If you detect any damage to the
power cable or the casing, do not operate the device. Contact your specialised dealer.

sAFeTy insTRUCTiOns

CAUTION! Please exercise particular caution when handling 230 V power voltage. This voltage
rating may lead to a critical electrical shock! Any damage caused by the non-observance of this
operation manual excludes any warranty claims. The manufacturer is not liable for any damage
to property or for personal injury caused by improper handling or non-observance of the safety
instructions.
• This device left the works in a perfect condition. To maintain this condition and to ensure a risk-free
operation the user must observe the safety instructions and warnings contained in this operation
manual.
• For reasons of safety and certification (CE) the unauthorised conversion and/or modification of the
device is prohibited. Please note that in the event of damage caused by the manual modification
to this device any warranty claims are excluded.
• The inside of the device does not contain any parts which require maintenance, with the exception
of wear parts that can be exchanged from the outside. Qualified staff must carry out maintenance,
otherwise the warranty does not apply!
• Ensure that power is only supplied after the device has been fully set up. Always plug in the mains
plug last. Ensure that the mains switch is in the „OFF" position when connecting the device to
power.
• Only use cables that comply with regulations. Observe that all jacks and bushes are tightened and
correctly hooked up. Refer to your dealer if you have any questions.
• Ensure that when setting up the product the mains cable is not squashed or damaged by sharp
edges.
• Prevent the mains cable from coming into contact with other cables! Exercise great care when
handling mains cables and connections. Never touch these parts with wet hands!
• Connect the power cable exclusively to appropriate shock-proof outlets. The only supply point to
be used is a supply outlet in accordance with specifications of the public supply network.
• Disconnect the device from the supply outlet when not in use and before cleaning! Be sure to hold
the mains plug by the body. Never pull the mains cord!
• Position the device on a horizontal and stable low-flame base. When experiencing feedback, direct
the wave field of your loudspeakers away from the device.
• Avoid any concussions or violent impacts when installing or operating the device.
• When selecting the location of installation make sure that the device is not exposed to excessive
heat, humidity, and dust. Be sure that no cables lie around openly. You will endanger your own sa-
fety and that of others!
• Do not rest any containers filled with liquid that could easily spill on the device or in its immediate
vicinity. If, however, fluids should access the inside of the device, immediately disconnect the mains
plug. Have the device checked by a qualified service technician before re-use. Damage caused by
fluids inside the device is excluded from the warranty.
• Do not operate the device under extremely hot (in excess of 35° C) or extremely cold (below 5° C)
conditions. Keep the device away from direct exposure to the sun and heat sources such as radia-
tors, ovens, etc. (even during transport in a closed vehicle). Never cover the cooling fan or vents.
Always ensure sufficient ventilation.
14