Reloop RMP-1 SCRATCH MK2 B Bedienungsanleitung Seite 19

10. Scratch effect
Select the Scratch effect by pressing the Scratch button -10-. Now you can scratch, forward, reverse
and stop the track while in play mode with the inside metal range of the Jog Wheel -18- like a vinyl
record. The Jog Wheel senses the touch of your fi ngers. Press the Scratch button a second time to
deactivate the scratch effect.
NOTE: when pressing and holding the Scratch button for more than 2 seconds, the „Scratch-to-
Cue" mode is activated. If only the Jog wheel is touched, the player instantly returns to the Cue
Point without changing into the Pause or Playback mode. This is how to scratch a track from
the desired Cue Point. Press the Scratch button a further time to deactivate the Scratch mode.
Personalise your preferred Jog wheel sensitivity. Proceed as detailed in Item 7, sub-item 5 (Sen-
sitivity).
11. Display
The Display -11- indicates all important functions of the player:
M l K
n
O
P
Q
A) Track/Folder
Indicates the number of the current track or folder (folder for MP3-CD).
B) Time Mode
Indicates if the player shows the elapsed time of a track (nothing on display), the remaining time of
a track (the display reads „Remain") or the remaining time of the entire CD (the display reads „Total
Remain"). Use the Time button -7- to switch between the modes.
C) Time
Indicates the time in the chosen Time mode in minutes, seconds and frames (1/75 min.).
D) Playing Address
Visualises the time display and increases or decreases, depending on the Time mode. Shortly before
a track ends, the entire bar fl ashes.
E) Anti-Shock Memory Display
Indicates how much music is saved in the Anti-Shock Memory and if the Instant Start function is
available. „19" is the maximum memory value and represents 10 seconds for the anti-shock memory.
F) Pitch Display
Indicates the set pitch value of a track in per cent.
g) Key lock
Indicates if Key Lock has been activated (shows the padlock symbol). If Key Lock is activated, the
track's tone pitch remains the same when the tempo changes.
h) BPM Status
Indicates that Auto BPM Counter (display reads „Auto BPM") is activated.
I) BPM Display
Indicates the current BPM value of the track.
J
A B C D e
i
h
g
F
19