Multiple Handsets; Internal Calls (Intercom Function); Transferring External Calls To Another Handset; Conference Calls - switel D6026 Bedienungsanleitung

11

Multiple Handsets

Up to five handsets can be registered on the base station. Each handset can only be registered on one base station at any
particular time.
Note: The standardised GAP Standard enables SWITEL handsets and even those from other manufacturers to be
integrated in the telephone system. In the same way, a SWITEL handset can be registered on base stations from
other manufacturers as long as they comply with the GAP Standard.
The following options are available if several handsets are used:
S
Internal calls between the handsets (intercom),
S
External calls can be transferred between the handsets.
S
Incoming external calls are received on all handsets.
S
Conference calls between two handset users and one external caller.
Note: If one of the other handsets is currently using the outside line, the
make another external call.
11.1

Internal calls (intercom function)

As soon as several handsets are registered on the base station, they can be used free of charge for internal calls.
1. Press the I button and dial the number of the handset required, e.g. 2".
2. The call can be taken on the handset called.
Note: If an external call is received during an internal call, short acoustic signals are issued and the caller's number appears
in the display, if available.
3. End the internal call by pressing the F button.
4. Press the F button again to take the external call.
11.2

Transferring external calls to another handset

If you have taken an external call on a handset, the call can be transferred to another handset.
To do this, press the I button and then the internal number, e.g. "2", of the handset required.
Note: If the handset called does not answer, take the call back by pressing the I button.
After the internal call has been taken by the handset called, the following options are available:
1. Consultation / Brokering: You can talk to the party using the other handset and then return the external caller by
pressing the I button. You can switch between the external and internal parties as often as necessary.
2. Transfer call: By pressing the C button on the first handset, the external call is transferred to the handset called.
11.3

Conference calls

An external call can be transferred to another internal handset for a conference call. This enables two handset users to confer
with the external caller at the same time.
1. Establish the required connection to the external caller.
2. Press the I button and dial the number of the second handset required.
3. When the second, internal handset user has taken the call, press the # button and all three parties are connected
in a conference call.
Note: During a conference call, press the I button to put the external caller on hold. Press the I # buttons in
succession to activate the conference facility again.
4. The conference is terminated by one of the handset users ending the call.
- Multiple Handsets -
b
icon appears in the display. It is not possible to
79