Multiple Handsets / Base Stations; Registering Handsets - switel DF70 Bedienungsanleitung

Multiple Handsets / Base Stations

9 Multiple Handsets / Base Stations
Multiple Handsets
The international GAP
can be integrated in the telephone system. In the same way, an SWITEL handset can be registered on base
stations from other manufacturers as long as they comply with the GAP Standard.
At least two handsets must be registered on a base station in order to deregister a handset from
that base station. Before registering handsets on a new base station, the handsets should be dere-
gistered from the old one first.

Registering handsets

Up to 5 handsets can be registered on the base station. The handset is automatically assigned an internal
call number following registration. The internal call number appears in the display.
Registering DF70 handsets on DF70 base stations
5 sec ‘
Register the handset. . Page 67
Registering DF70 handsets on base stations from other manufacturers
Follow the instructions in the operating manual from the original manufacturer to set the base station from
the external manufacturer to Register mode. Use the PIN code from the external manufacturer for the regis-
tration.
Register the handset. . Page 67
Registering handsets from other manufacturers on DF70 base stations
5 sec ‘
Follow the instructions on registering handsets in the operating manual from the external manufacturer. Use
the currently valid PIN code to register (default setting: 0000).
Multiple Base Stations
Your handsets can be registered simultaneously on up to 4 different base stations. DF70 base stations can
be used for this or base stations from other manufacturers as long as the devices comply with the GAP
Standard. All base stations require their own telephone line socket. The base stations can be connected to
telephone line sockets with the same call number and even to connections with different call numbers.
Mobility through registration at various locations
Register the handset on base stations at various locations. The handset automatically logs on to the near-
est base station, as long as the Automatic" function is activated. . Page 67
Increasing the range
Position the base stations so that the ranges of the individual base stations overlap. If necessary, test the
range of your handsets. Obstructions in buildings can reduce the range considerably.
Calls in progress, however, cannot be transferred from one base station to another.
1
GAP: Generic Access Profile = Standard for the interoperation of handsets and base stations from
other manufacturers.
70
1
Standard ensures that SWITEL handsets and handsets from other manufacturers
Set the DF70 base station to Register mode
Set the base station to Register mode
1