Extending The Telephone System; Multiple Handsets - switel DE21 Serie Bedienungsanleitung

Extending the Telephone System

10 Extending the Telephone System
The internationally approved GAP
handsets and base stations from different manufacturers. As a result, it is
possible to integrate SWITEL devices and devices from other manufac-
turers together in one telephone system. It is possible, however, that some
functions are not available.

Multiple handsets

Up to 4 handsets can be registered on the base station.
Registering handsets
Before starting to register a handset, switch the base station to Register
mode.
4 sec P/‘ ,
Now register the handset; . Page 71. The currently valid PIN code is
used for registration purposes; . Page 71.
The handset is automatically assigned an internal call number following
registration. The internal call number appears in the display.
To register handsets from other manufacturers, please refer to
the operating manual supplied with them.
Deregistering handsets
A handset can only be deregistered from a base station using an-
other handset registered to that base station.
Handsets are deregistered via the menu.
Refer to Page 71 for the sequence of menu option selections.
1
GAP: Generic Access Profile = Standard for the interoperation of
handsets and base stations from different manufacturers.
74
1
standard regulates the compatibility of
Activate Registration mode
Multiple base stations
You can increase the range of your handset by registering it on several
base stations. It can be simultaneously registered on up to 4 different base
stations. Each base station requires its own telephone line socket. Con-
nections can be used with the same call number or with different ones.
Calls in progress cannot be transferred from one base station to
another.
Increasing the range
Position the base stations so that the ranges of the individual base stations
overlap. Test the ranges of the handsets because obstructions in buildings
restrict the range. Register the handset on all the base stations. Activate
the AUTO function on the base station; . Page 71. The handset then
automatically searches for the nearest base station with the best connec-
tion.
If necessary, you can increase the range of the telephone system
by switching ECO mode off . Page 71
(LOW RF POWER → OFF).
Mobility through registration at various locations
Register the handset on various base stations at different locations. Acti-
vate the AUTO function on the base station; . Page 71. Regardless of
your current location, the handset automatically searches for a base sta-
tion within range.