Inhaltsverzeichnis
Werbung
7
Operation
7.1
Display
Display
Description
a
On: A call is currently being made.
On: An external call is currently being made.
b
Flashing: An external call has been received.
On: An internal call is currently being made.
I
Flashing: An internal call has been received.
On: You have accessed the calls list.
c
Flashing: There are new calls in the calls list.
f
On: The phone number, called from the calls list, has not been answered.
g
On: The phone number, called from the calls list, has been answered.
Flashing: Batteries must be charged.
d
On: Displays battery capacity.
Runs through the segments: Batteries are being charged.
H
On: The phone book is open.
e
On: Programming mode has been activated.
On: Key lock has been activated.
k
On: The connection to the base station is good.
h
Flashing: The handset is out of range of the base station.
On: The phone number is in excess of 12 digits.
m n
7.2
External answering machine
The G icon indicates a new message has been recorded for you on the external answering machine. The G icon is only
displayed when the equipment is connected to a digital telephone connection. The icon disappears after playing the message.
Caution: The external answering machine and transmission of the G icon is a supplementary service provided by
your telephone network provider. Contact your network provider for further information.
7.3
Taking a call
When a call is received, both the handset and base station ring. Take the handset from the base station or press the Call button
F. A connection is established.
To end the call, replace the handset in the base station or press the F button.
Note:
When the handset is ringing, press the D or E button to adjust the ringing volume.
7.4
Taking two calls
You will hear acoustic signals (call waiting) if a second call is received while you are carrying out a telephone conversation. The
number of the second caller appears in the display. Press the R and 2" buttons in sequence to switch between the two
callers. One caller is put on hold while you converse with the other.
Note:
In order to use the supplementary services provided by your telephone network provider, the Flash time must be set
to 300 ms (refer to Chapter 10.5).
Note:
The caller number display and call waiting function are optional services offered by the telephone network provider.
Contact your network provider for further information.
7.5
Making a call
1. Enter the phone number (max. 32 digits). A maximum of 12 characters can appear in the display. In the case of longer
phone numbers, only the last 12 digits are displayed.
Note:
Incorrect digits entered can be deleted by briefly pressing the A button. Pressing the A button longer deletes the
entire phone number.
2. Press the Call button F and the connection is established.
Note:
Alternatively, press the F button and then enter the phone number. It is not possible to correct wrongly entered
numbers when using this method of dialling.
72
- Operation -
Werbung
Kapitel
Inhaltsverzeichnis
Fehlerbehebung
