Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
8
Multiple handsets
One additional handset can be logged onto your base station.
Note: SWITEL handsets and also handsets from other manufacturers can be integrated into the telephone system
by means of the internationally adopted GAP standard. In the same way, you can use an SWITEL handset with
base stations from other manufacturers, as long as these units work using the GAP standard.
When you use multiple handsets you will have the following options:
- Internal calls between handsets.
- External calls can be forwarded between handsets.
- Incoming external calls are signalled on all handsets.
Warning: If another handset is already using the external line, the indicator light will illuminate on all handsets. In this
case, it is not possible to make a further external call.
8.1
Making an internal call
When you have connected multiple handsets to a base station, you will be able to make internal calls.
To do this, press the
call button
on the handset called.
8.2
Connecting external calls to another handset
If you have accepted an external call on one handset, you can forward the external call to another handset. To do this,
press the
button and then the number (1 or 2) of the required handset.
If there should be no reply from the handset called, you can take the call back with the
After the internal call has been accepted at the other handset, you have the following options:
A. Consultation / Brokering: You can now speak to the internal subscriber and return to the external caller by
pressing the
button. You can switch between the external and the internal call as many times as you like in this
way.
B. Forward the call: The external call is forwarded to the handset called by pressing the call button
handset.
8.3
Logging on and logging off handsets
8.3.1
Logging on handsets
1.
Press and hold the page button
log on the new handset to the base station within 90 seconds.
2.
Press the
button on the handset.
3.
Select the REGISTER menu with
4.
Select the REG BASE menu with
5.
Now enter the number of the base station (1 - 4) using the number pad. If the handset is already connected
to a base station, the corresponding numbers will flash.
6.
Confirm your entry with the
7.
After the base station has been found, you must enter the PIN Code for the base station (factory setting 0 0 0
0).
8.
Confirm your entry with the
now logged on and can be used for external and internal calls.
9.
An internal number will now be automatically assigned to the handset. The handset that has already been
logged on has the internal number 1. The second handset to be logged on is given the internal number 2.
These internal numbers are shown in the right of the display next to the name.
80
- Multiple handsets -
button and then the number 1 or 2 of the required handset. The call is accepted with the
on the base station for 6 seconds until you hear two signal tones. Now
and
and
button. A search will now be carried out for the base station.
button and after a few seconds you will hear a signal tone. The handset is
and confirm with
.
and confirm with
.
button.
on the first
Werbung
Kapitel
Inhaltsverzeichnis
Fehlerbehebung
