Herunterladen Inhalt Inhalt Diese Seite drucken

Recording Functions; Cd Direct Copy; Synchronized Recording; Rec Mode Finalize - Yamaha CDRD651 Bedienungsanleitung

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 64

RECORDING FUNCTIONS .....................................................

CD DIRECT Copy

This unit has a CD DIRECT copy function using both disc
trays. It digitally copies an entire source CD placed on disc
tray A onto a disc placed on disc tray B to be used for
copying.
When making a CD DIRECT copy, the copy speed can be
selected at either normal or double speed. However the
recording level cannot be changed when making a CD
DIRECT copy.
1.
Load a source CD on disc tray A and a disc to be
used for copying on disc tray B. Press v (OPEN/
CLOSE on the remote) to close the trays.
Make sure that the recordable time on the disc to be
used for recording is longer than the total play time on
the source CD.
2.
Press and rotate the MULTI JOG knob on the
front panel (MENU and +/– on the remote) to
select "Copy Speed" in the set menu shown in the
display. Then press the MULTI JOG knob (MENU
on the remote) again.
Copy
x2
3.
Copy speeds of "x1" and "x2" appear blinking
alternately in the display as the MULTI JOG knob
(+/– on the remote) is rotated. Select the desired
copy speed by pressing the knob (+/– on the
remote).
4.
After the copy speed is set, press COPY to start a
CD DIRECT copy.
When making a CD DIRECT copy with the
synchronized recording mode described in the
next section, press REC MODE to select the
synchronized recording mode and press COPY.
When copying is complete, finalization automatically
starts and the disc can then be played on a standard
CD player. However, finalization is not performed when
doing single or all track synchronized recording.
Notes
While making a CD DIRECT copy at double speed, the analog
signal can be heard but the digital signal can not.
Never turn off the power or pull out the plug out from the wall
outlet during a CD DIRECT copy.
A disc copied from a source CD cannot be copied to another
disc.
See page 28 for Serial Copy Management System (SCMS)
standards.
If a disc cannot be digitally copied, analog copy is possible. To
make an analog copy, set the "SCMS Mode" to "ANALOG" in the
menu settings. (See page 11 for details.)
16
E-
CD–R
L
dB
–60
–30
–I0
–6 –4 –2 –I
0 OVER
R

Synchronized Recording

This function automatically starts recording when an audio
signal is detected. Therefore, recording starts at the same
time the source CD starts playback. There are three ways of
doing synchronized recording as follows:
Single track synchronized recording
This mode is convenient for recording a mix of tracks from
different sources. A new track marker is automatically
placed at the start of each track.

REC MODE

INPUT
MULTI JOG
INPUT
REC MODE
TRACK NO.
PUSH MODE
DISC A
DIGITAL ANALOG
COPY
FINALIZE

ERASE

DIGITAL REC LEVEL
B
DISC
Recordable
ReWritable
ANALOG REC LEVEL
REC MUTE
REC
FADE IN/OUT
MIN
MAX
REC
1.
Load a disc to be used for recording.
Use a disc containing enough space for recording a
source CD.
2.
Press REC to set this unit to the record pause
mode.
3.
Select the appropriate input source to be used for
recording by using INPUT on the front panel.
4.
Adjust the recording level. (See page 15.)
5.
Make sure that the source component is in the
stop mode.
6.
Press REC MODE.
The SINGLE and SYNCHRO indicators light in the
display.
2
1:41
SINGLE
7.
Start playing the source.
• This unit automatically starts recording.
• When playback of the current track is over (digital
recording), or this unit has recorded 4 seconds of
continuous silence as a track separation (analog
recording), recording ends. Then this unit enters the
record pause mode and synchronized recording
mode is canceled.
8.
5
6
Repeat steps
,
track.
9.
Press a when all recording is complete.
Disc information is being written to the PMA (Program
Memory Area).
When all recording is complete, perform finalization. (See
page 21 for the finalization procedure.)
REC
COPY
A
OPEN/CLOSE
B
FADE IN/OUT
TRACK NO.
REC
REC MUTE
WRITE

REC MODE FINALIZE

ERASE
REC MODE
CD–R
REC
44.I
L
dB
–60
–30
–I0
–6 –4 –2 –I
0 OVER
SYNCHRO
R
7
and
to record another

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis