Specifications - Yamaha CDRD651 Bedienungsanleitung

.................................................. ADDITIONAL INFORMATION

Specifications

Audio Performance
Frequency response ........................... 5–20,000 Hz, ±0.5 dB
S/N ratio
Playback ................................................................. 100 dB
Recording ................................................................. 90 dB
Total harmonic distortion (1 kHz)
Playback ................................................................. 0.004%
Recording ................................................................. 0.02%
Dynamic range
Playback ................................................................... 95 dB
Recording ................................................................. 85 dB
Laser Diode Properties
CD (Drive A)
Material .................................................................. GaAIAs
Wavelength ....................................................... 790±25nm
Emission duration ............................................ Continuous
Laser output .................................................... Max:180µW
CDR (Drive B)
Material .................................................................. GaAIAs
Wavelength ......................................................... 785±5nm
Emission duration ...................................................... Pulse
Laser output ............... Write mode:Max 10mW(Duty 50%)
Output value determined by 21 CFR CHAPTER1,
SUBCHAPTER J.
Inputs
LINE IN (REC)
Type ....................................................................... Pin jack
Standard input level ............................ 700 mV/20 k-ohms
DIGITAL IN OPTICAL
Type ................................... Square optical connector jack
Outputs
LINE OUT (PLAY)
Type ....................................................................... Pin jack
Standard output level
(1 kHz, 0 dB) .............................................. 2.0 ± 0.5 Vrms
DIGITAL OUT OPTICAL
Type ................................... Square optical connector jack
PHONES
Standard output level
(Input 150 ohms shorted, –20 dB)
.............................................................. 300 mV/150 ohms
General
Power supply
[U.S.A. and Canada models] .................. AC 120 V, 60 Hz
[Australia model] ..................................... AC 240 V, 50 Hz
[U.K. and Europe models] ...................... AC 230 V, 50 Hz
[General model] ........... AC 110/120/220/240 V, 50/60 Hz
Power consumption ......................................................... 24 W
Dimensions (W x H x D)
............ 435 x 117 x 285 mm (17-1/8" x 4-1/4" x 11-1/16")
Weight ..................................................... 5 kg (13 lbs. 14 oz.)
Accessories ............................................. RCA Pin Cables (2)
Ferrite core for headphones cable
(U.S.A., Canada, and Australia model only)
Specifications are subject to change without notice.
Optical Fiber Cable
Remote Control
Batteries (2)
31
E-