Dolby D. Set (Dolby Digitalset); Dts Set (Dts Lfe Level) - Yamaha RX-V620RDS Bedienungsanleitung

SET MENU
6 DOLBY D. SET (Dolby Digital
set)
This setting is effective only when this unit decodes
Dolby Digital signals.
6 DOLBY D. SET
LFE LEVEL • • • • 0dB
D-RANGE
• • • MAX STD MIN
–/+
/
I LFE LEVEL
Use this feature to adjust the output level of the LFE
(low-frequency effect) channel when playing back a
Dolby Digital signal. The LFE signal carries the low-
frequency special effect sound which is only added to
certain scenes.
Control value (dB): –20 to 0
Initial setting: 0 dB
Notes
• Adjust the LFE level according to the capacity of your
subwoofer.
• Normally, around –6 dB to –8 dB is most suitable for listening
at home.
I D-RANGE (dynamic range)
Use this feature to adjust the dynamic range (the
difference between the maximum level and the minimum
level of sounds).
Choices: MAX, STD (standard), MIN
Initial setting: MAX
• Select MAX for feature films.
• Select STD for general use.
• Select MIN for listening to sources at an extremely
low volume level.
44
: Adjust
: Select
Dialog
level
Input level
STD
H-LEVEL CUT
0.0
Dialog
level
1.0
1.0
0.0
L-LEVEL BST
Input level
Note
• When you select MIN, the sound output may be faint because
some Dolby Digital signals are not compatible with the
minimum-level dynamic range. In this case, select MAX or
STD.

7 DTS SET (DTS LFE level)

This setting is effective only when this unit decodes DTS
signals.
Use this feature to adjust the output level of the LFE
(low-frequency effect) channel when playing back a DTS
signal. The LFE signal carries the low-frequency special
effect sound which is only added to certain scenes.
Control range (dB): –10 to +10
Initial setting: 0 dB
7 DTS SET
LFE LEVEL • • • • 0dB
–/+
/
Note
• Adjust the LFE level according to the capacity of your
subwoofer.
MAX
MIN
Dialog
level
Input level
: Adjust
: Exit