Returning To The Factory Setting - Yamaha RX-V620RDS Bedienungsanleitung

REMOTE CONTROL FEATURES

Returning to the Factory Setting

I To return to the factory-set codes
in all positions
1
Press j / i at the same time for about
4 seconds.
The indicator flashes twice.
2
Enter the code number "9990".
Make sure that the indicator flashes twice.
The following codes are factory set.
Selector dial position Component
TV TV
CBL/SAT Cable TV
VCR VCR
DVD/LD DVD player
CD CD player
TAPE/MD MD recorder
We recommend that you write all the code numbers you have set on the table above.
54
I To return to the factory-set codes
in each position
1
Set the selector dial to the
position for the
component to be returned
to the factory setting.
2
Press j / i at the same time for about
4 seconds.
The indicator flashes twice.
3
Enter the code number "0000".
Make sure that the indicator flashes twice.
Code
0101
0006
0002
0008 (YAMAHA DVD player)
0005 (YAMAHA CD player)
0024 (YAMAHA MD recorder)
Set component Set code