Installation
Note: The included mounting material is suitable for ordinary solid
concrete or masonry construction . Other wall substrates may require
other fastening materials . Seek specialist advice if necessary .
Note: You will need an electric drill .
m CAUTION! RISK OF INJURY! Read the operating instructions
for your drill .
m CAUTION! Ensure that you do not damage any electricity
cables in the wall or ceiling .
When selecting the mounting location, pay attention to the following:
Ensure that the spotlight 3 illuminates the desired area . You can
swivel the spotlight 3 into the desired position .
Ensure the sensor 4 covers the desired area . The sensor 4
has a maximum coverage range of approx . 5 to 8 m, with a
coverage angle of about 90° (depending on the mounting
height – a height from 1 .8 to 2 .5 m is ideal) (Fig . D: HG04465A
or Fig . F: HG04465B) .
Ensure the sensor 4 is not illuminated at night by street lighting .
This can influence its functioning .
Ensure that the solar panel 1 is mounted in a place with direct
sunlight .
32
GB/IE