Before Installation; Installation - LIVARNOLUX HG02408 Montage-, Bedienungs- Und Sicherheitshinweise

Before installation

Note: Remove all packaging materials from the product.
Important: The electrical connection must be established by a qualified
electrician or a person trained to perform electrical installations. This per-
son must be familiar with the properties of the product and the connection
regulations.
Before installation ensure that the circuit, to which the product will be
connected, is not energised. To do so, remove the fuse or switch off the
circuit breaker in the fuse box (0 position).
Use a voltage tester to verify the de-energised status.
The included mounting material (screws
able for ordinary solid concrete or masonry construction. Check which
mounting material is suitable for your chosen mounting surface. If neces-
sary, seek expert advice.

Installation

Make sure you will not be drilling into electrical, gas or water lines inside
the wall. Use a power drill to drill the holes into the brick wall. Always ob-
serve all safety instructions for the power drill in the ma nual for the power
drill. Death or injury due to electric shock may otherwise result.
When selecting the mounting location, pay attention to the following:
Select a sturdy and vibration-free wall.
Keep a minimum distance of approx. 20 cm to other objects to ensure
a good ventilation.
Only mount the product in one direction. The "UP" label on the
product resp. the arrow should be pointed upwards (see Fig. D).
28 GB/IE
and wall plugs
25
) is suit-
26