Ensure that the solar panel 1 is not installed where there are
strong temperature fluctuations, e .g . due to heating devices .
Ensure that the solar panel 1 is installed far away from
unnatural light sources and in southern direction .
Ensure that the connection cable 17 of the solar panel 1 can
reach the spotlight 3 . Max . distance between the solar panel
1 and the spotlight 3 is approx . 2 .5 m (HG04465B only) .
For HG04465A:
Carefully fold the solar panel 1 upwards .
Remove the mounting plate 6 from the spotlight 3 by loosening
the screws of the ball joint cover 7 (Fig . B) .
Use the slotted holes of the mounting plate 6 intended for the
screws 8 to mark the drill holes .
Now drill the fixing holes (Ø 8 mm, depth approx . 40 mm) .
Before drilling the fixing holes, ensure there are no gas, water or
electrical lines that could be drilled into or damaged in the area
where you will be drilling .
Insert the dowels 5 into the drill holes (Fig . B) .
Attach the mounting plate 6 using the screws 8 provided
(Fig . B) .
Ensure that the solar panel 1 is orientated towards the sun .
GB/IE
33