Note: The built-in charging controller of the product prevents the
rechargeable batteries 11 from overcharging .
Replace the rechargeable batteries 11 if light output does not
improve after charging (Fig . C: HG04465A or Fig . E: HG04465B) .
Inserting / replacing batteries
Note: The rechargeable batteries 11 are pre-installed . Only use
batteries as stated in the "Technical data" chapter . To remove the
rechargeable batteries 11 , switch the spotlight 3 off using the ON/
OFF switch 2 .
Open the battery compartment 12 on the back side of the
spotlight 3 by loosening the fixing screws 13 counterclockwise
to remove the front cover 10 (Fig . C: HG04465A or
Fig . E: HG04465B) .
Remove the old rechargeable batteries 11 .
Insert the new rechargeable batteries 11 . Use only batteries of
the specified type (see "Technical data") .
Note: When inserting the battery, ensure the correct polarity!
This is indicated in the battery compartment 12 .
Close the battery compartment 12 again with the front cover
10 and fix the front cover 10 by turning the fixing screws 13
clockwise .
GB/IE
31