Operation; Maintenance; Daily, By A Trained Operator - JAC SLIM SELF Übersetzung Der Originalanleitung

7

OPERATION

Braked castors must be locked while the machine is in operation (fig.1, n°6).
Switch on the power to the machine at the start of the day using the main isolator switch
(fig.3, n°12).
Operating procedure (figs. 6, 7, 8)
A. Open the cover.
B. Place your loaf on the infeed platen, positioned vertically on the right of the channel. For the
optimum result, be sure to position the loaf such that the claw makes contact with a crusty part
(pre-cut loaves, attached baked loaves, etc.).
C. Close the cover.
D. Select the desired slicing thickness by pressing the relevant green button to start the slicing
cycle.
E. On completing the cycle, the cutting channel lights up, open the guard.
F. Take the sliced loaf and wrap it.
8

MAINTENANCE

8.1

Daily, by a trained operator.

I. Clean the inside of the machine
A. Check whether you need to empty the crumb tray (fig.3, n°17) (NB: don't forget to lock the
door).
B. Clean the tables using a brush.
C. Clean the infeed table (fig.3, n°15).
D. Clean the cover window using the brush supplied (fig.1, n°2).
E. Use a dry cloth to clean the inside.
F. Use a damp cloth to clean the outside.
I. Activate cleaning mode (fig.9)
A. Close the cover.
B. Press the JAC logo at the top right of the display for 15 seconds.
C. Press the cleaning pictogram to activate cleaning mode.
The claw and the infeed platen will drop down to the lowered position.
D. Open the door.
E. Clean the claw and the cutting channel using a brush. Be careful, as the claws have sharp
tips. Be sure to use the protective gloves supplied.
F. Close the cover and the front door in order to return the components to the initial position.
II. Cleaning the blade (fig.10, 11)
A. Close the cover.
B. Press the JAC logo at the top right of the display for 15 seconds.
C. Press the blade cleaning pictogram to activate maintenance mode.
11
English