Technical Specifications; Details Of Materials In Direct Contact With Dough; Installation And Commissioning; Unpacking The Machine - JAC SLIM SELF Übersetzung Der Originalanleitung

4

TECHNICAL SPECIFICATIONS

4.1 Technical specifications
Height (mm)
Width (mm)
Depth (mm)
Entry channel length (mm)
Entry channel width (mm)
Entry channel height (mm)
Packaging (mm)
Net weight (kg)
Net weight + packing (kg)
Motor power rating (kW)
Motor type
220 V - 50 Hz (A)
380 V - 50 Hz (A)
Capacity (slices/minute)
Blade diameter (mm)
Noise level (dB)
4.2

Details of materials in direct contact with dough

Infeed channel: STAINLESS STEEL 5WL 430
Claw housing: STAINLESS STEEL 430
Claw: STAINLESS STEEL 430
Blade: TEFLON
Lower channel: STAINLESS STEEL 5WL 430
Infeed platen: STAINLESS STEEL 430
Bagger: STAINLESS STEEL 430
5

INSTALLATION AND COMMISSIONING

5.1

Unpacking the machine:

Machines are delivered from our works on pallets, strapped and protected with cardboard. First of all,
the packaging must be examined and any damage caused in transit must be declared directly to the
carrier.
A. Remove the cardboard and the packaging bag from the machine.
B. Remove straps, taking particular care when they are released by cutting.
C. Detach the machine from its pallet by removing the wooden battens wedging the castors.
D. Take the machine off the pallet. Make sure you do this with at least two people in order to
lower it as gently as possible onto the floor and avoid tipping the machine over.
English
Stainless steel exterior
Special colour
8
SLIM
1443
600
712
420
250
160
1600 x 860 x 800
210
230
1.1
Single phase - Three phase
5
3.2
100
260
60.1 dB ± 2.5 dB
optional
optional