Deleting Transmitters - CAME V6000 Installationsanleitung

Memorizing the transmitters
You can memorize up to 16* diff erent codes/users. When the operator is idle:
1
2
3
* When you try to memorize the 17th code (or transmitter) the courtesy light flashes slowly five times to
signal that the memory is full.

Deleting transmitters

1
2
3
Press and keep pressed S until
0 appears on the left side of the screen. The segments of the 0 on the left side of
the screen rotate clockwise.
Consecutively press twice the key that you want to
BEEP to confi rm that the transmitter has been memorized.
Press and keep pressed the S until
the 0 appears on the left of the display. The segments of the 0 on the right of the display turn
clockwise.
When the 0 on the left disappears, release the S key: the transmitters have been deleted.
Release the S key.
memorize.The control unit will