Applicative examples
SECTIONAL DOOR
COUNTERBALANCED OVERHEAD DOOR,
partially retracting and protruding
INSTALLATION
The following illustrations are just examples, in that the space available for fitting the operator and
accessories varies depending on the overall dimensions. It is up to the installer to find the most suitable
solution.
Assembling the traction guide
Fitting the brace to the transmission guide a use the supplied nut and bolt
Positioning the traction guide
for sectional doors exceeding the overall dimensions of the spring-pole brace.
for overhead doors between 10 and 20 mm from the apex point of the leaf's slide arc.
for partially retracting protruding counter-balanced overhead doors, use the V201 arm (see attached
technical documentation).
* double-guide sectional
door
SPRING-BALANCED OVERHEAD DOOR,
fully retracting and protruding
M6x80
* single-guide sectional
door
.
M6
V201