CAME V6000 Installationsanleitung Seite 33

Fastening the traction guide
D Fasten the traction guide to the center of the doorway, using suitable screws.
E Raise the guide and position in horizontally to measure the distance to the ceiling, then fasten it.
F Instal the support braces
Bend the perforated fl at tabs so they fi t snugly and so as to compensate for the distance between the guide
and ceiling.
Fasten the fl at tabs to the support braces and to the U-shaped brace using the supplied screws and washers.
Drill the ceiling so the holes match those on the fl at tabs.
Fasten the fl at tabs to the ceiling using suitable dowels and screws.
Fitting the transmission arm to the door
Position the transmission arm brace to the door's top rail, perpendicularly to the traction guide
fasten it using the supplied screws or other suitable fasteners.
If mounting the curved lever
and the U-shaped brace b onto the guide.
fi t it to the transmission arm by using the supplied nuts and bolts
and