Recycling & Warranty - Parkside PHG-2000 Bedienungs- Und Sicherheitshinweise

Cleaning & maintenance / Recycling & warranty
• Regular maintenance of your hot air gun
prevents unnecessary problems. Keep
the ventilation slots of the hot air gun
clean to prevent overheating.
Troubleshooting
In case the hot air gun does not work well,
we give you subjoined some possible causes
and their solutions.
The engine gets overheated
• The ventilation slots of the hot air gun are
dirty.
• Clean the ventilation slots.
The hot air gun does not start when it is
switched on
• Interruption in the electrical circuit.
• Check the mains lead and the mains
plug.
• The switch is defective.
• Pull the mains lead out of the wall
socket, because there is a chance of
fire risk ! Have the hot air gun
repaired at your local dealer.
The engine does not work, but it does
heat
• Interruption in the electrical circuit.
• Pull the mains lead out of the wall
socket, because there is a chance of
fire risk! Have the hot air gun repaired
at your local dealer.
faults
Should a fault occur, e.g. after wear of a part,
please contact the service address on the
warranty card. In the back of this manual you
find an exploded view showing the parts that
can be ordered.
10 GB
HAM6005 Ma-D # 0902-24.indd 10
5. reCYCling & WarranTY
environment
To prevent damage during transport, the
appliance is delivered in a solid packaging
which consists largely of reusable material.
Therefore please make use of options for
recycling the packaging.
Do not discard electric appliances
together with ordinary household
waste.
According to European Directive 2002/96/
EG on used electrical and electronic devices
and its implementation in national law,
used electrical devices must be collected
separately
and recycled in an environmentally sound
manner.
Recycling alternatives to the return
requirement: As an alternative to returning
the device, in the case of a transfer of
ownership, an electrical device owner is
obliged to assist in proper utilisation.
For this purpose, the used device can also
be handed over to a collection facility that
will see to its disposal in the accordance
with the national circular economy and
waste disposal law. Not affected are
accessory parts and tools that accompany
used devices but contain no electrical
components.
Warranty
The guarantee conditions can be found on
the separately enclosed guarantee card.
24-02-09 16:30:09