Herunterladen Inhalt Inhalt Diese Seite drucken

Using The Appliance - Parkside PHG-2000 Bedienungs- Und Sicherheitshinweise

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 57
Safety instructions / Using the appliance
enclosed safety instructions.
Always check that the power supply
corresponds to the voltage on the
rating plate.
Class II machine – Double
insulation – You don't need any
earthed plug
replacing cables or plugs
Immediately throw away old cables or plugs
when they have been replaced by new ones.
It is dangerous to insert the plug of a loose
cable in the wall outlet.
using extension cables
Only use an approved extension cable
suitable for the power input of the machine.
The minimum conductor size is 1.5 mm
When using a cable reel always unwind the
reel completely.

3. USING THE APPlIANCE

The Hot air gun can be used for:
Plumbing work like tube connections,
solder, bowing tubes;
Removing paint, varnish and lacquer
without firerisk;
Quickly drying of appliances which have
become wet;
Drying surfaces for quick repairing;
Removing self-adhesive labels in a clean
way placing PVC labels;
Blistering after sticking PVC materials
can be smoothed after heating;
Easy removing of vinyl carpeting:
Forming all synthetics with a low
temperature (450 degrees) among which
polyethylene and PVC;
Forming all synthetics with a high
8
GB
HAM6005 Ma-D # 0902-24.indd 8
temperature (580 degrees) among which
acryl and plexiglass;
Smelting synthetics, among which
matters and foils with PVC layer;
Applying heat shrinking tubes;
Shrinkwrappers;
Thawing tubes and engines;
Repairing finishing layers: email of bath
and household appliances;
Applying epoxypowder coverlayers;
Repairing of ski's, surf-boards and other
sports goods;
Unscrewing too fast fixed screws and
connections.
Please note: This device is intended
exclusively for use in private households.
Commercial or similar applications do not
constitute intended use and will void all
.
warranty claims.
2
fitting and changing the nozzles
Always choose the nozzle that is best suited
to the job. Install or change nozzles only
when the device is completely cool. Proceed
with caution and beware of any sharp edges
on the nozzles. You can remove the nozzles
simply by detaching the discharge nozzle,
or attach them by sliding it on. In some
circumstances, this must be assisted by
gentle turning motions.
using the right nozzle
Paint and plastic will burn under strong heat.
Danger! Do not breathe in the fumes.
Glass protection nozzle (Fig. B1)
remove paint or varnish from windows.
Broken glass hazard!
Always use the glass protection nozzle when
working on glass or other sensitive surfaces.
Paint or varnish on moulded surfaces can
be lifted using an appropriate scraper or
24-02-09 16:30:08

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis