Machine Data; Safety Instructions - Parkside PHG-2000 Bedienungs- Und Sicherheitshinweise

Machine data / Safety instructions
HOT AIR GUN
Always read the instruction for
electrical products carefully before
use. It will help you understand your
product more easily and avoid unnecessary
risks. Keep this instruction manual in a safe
place for future use.

1. MACHINE dATA

Technical specifications
Voltage
Frequency
Power input
Weight
IP Class
Position I
Air flow
Air temperature
Position II
Air flow
Air temperature
Contents of packing
1 Hot air gun
1 Glass protection nozzle
1 Hook nozzle
1 Flat reduction nozzle
1 Reduction nozzle
1 Instruction manual
1 Warranty card
Product information
Fig. A
1. Ventilation slots
2. Nozzle outlet
3. Switch
4. Glass protection nozzle
5. Hook nozzle
6. Flat reduction nozzle
7. Reduction nozzle
6 GB
HAM6005 Ma-D # 0902-24.indd 6

2. SafeTY inSTruCTionS

Explanation of the symbols
instructions in this manual.
Safety instructions
230 V~ When using electric tools, basic safety
50 Hz precautions should always be followed to
2000 W reduce the risk of fire, electric shock and
0.62 kg personal injury. Read all these instructions
IP 20 before attempting to operate this product
and save these instructions.
300 l/min
450 °C
If the electrical cord becomes damaged, it
must be replaced with a special cord. These
500 l/min
are available from the manufacturer or
600 °C authorised customer service. The cord must
be changed only by the
manufacturer, an authorised service facility
or a similarly qualified person.
This appliance is not intended for use by
persons (including children) with reduced
sensory or mental capabilities, or lack of
experience and knowledge, unless they
have been given supervision or instructions
concerning use of the appliance by a person
responsible for their safety.
Children should be supervised to ensure that
they do not play with the appliance.
Special safety instructions for the heat
gun
a. A fire can result if the device is not
handled carefully.
Denotes risk of personal injury, loss
of life or damage to the tool in case
of non-observance of the
Indicates electrical shock hazard.
24-02-09 16:30:08