Changing The Nozzle; Further Examples Of Uses In The House, Car And Garden; Cleaning; Service - Parkside PHLG 2000 B1 Bedienungs- Und Sicherheitshinweise

Operation / Cleaning / Service / Warranty
©

Changing the nozzle

Too much heat causes paints
and plastics to ignite.
CAUTION! Do not inhale the resulting vapours.
Protector nozzle 4
and varnish (see Ill. B):
Place the protector nozzle
outlet tube .
3
The spatula shape of the nozzle ensures the air
is properly directed. Use a separate spatula for
removing paint or varnish.
Flat nozzle 5 – for detaching glues,
softening paint (see Ill. C):
Place the flat nozzle
Do not apply heat for too long a period, as
burnt paint becomes much more difficult to
remove. Many glues can be softened by warm-
ing. Glued connections can then be detached
and excess glue removed.
Reducing nozzle 6
Place the reducer nozzle
outlet tube .
3
Use the reducing nozzle
sleeves and film.
©
Further examples of uses in
the house, car and garden
Defrosting water pipes:
Notice! It must not be used for thawing PVC pipes.
Notice! It is often very difficult to tell the difference
between gas pipes and water pipes. If in doubt,
ask a competent person.
Notice! Copper pipes are joined using tin solder
and must not be heated above 200 °C.
Loosening a threaded connection:
Heating the threaded connection carefully can
often allow the connection to be released.
10 GB/IE
– for removing paint
on the
4
on the outlet tube
5
– for welding plastic:
on the
6
for heat-shrinkable
6
Removing weeds:
The heat dries out the weeds and micro-
organisms.
Lighting barbecue charcoal (see Ill. E):
Push the barbecue lighting nozzle
hot air nozzle
Charcoal ignites in a few minutes.
Wax removal:
You can remove wax residues from skis / snow-
board or from candle holders. Use the amount
of care appropriate to the product.
©

Cleaning

.
3
appliance, always remove the plug from the power
socket.
Keep the air inlet and outlet clean.
Use a cloth to clean the housing. Use a soft
cloth to clean the housing. Never use petrol,
solvents or cleaning agents as these may
attack the plastic.
©

Service

½
repaired only by qualified specialist
personnel using original manufacturer
parts only. This will ensure that your device
remains safe to use.
½
lead needs to be replaced, always
have the replacement carried out by
the manufacturer or its service centre.
This will ensure that your device remains safe
to use.
©

Warranty

The warranty for this appliance is for 3
years from the date of purchase. The ap-
pliance has been manufactured with care
Do not use methylated alcohol.
on to the
7
.
3
Before carrying out work on the
Have your device
If the plug or mains