Chuck Key Storage; Assembly; Mount Handgrip; Assemble/Set Protective Hood/Demounting - Parkside PWS 125 E4 Originalbetriebsanleitung

Only certiied, ibre-reinforced cutting or
grinding discs may be used.
In general, work with small scrubs. Exert
only moderate pressure on the workpiece.
Always work in the counter-direction. This
ensures that the device is not pushed out of
the cut through lack of control.

Chuck key storage

The chuck key (13) can be stowed in the
handle (1).
1. Slot the chuck key (13) into the attach-
ment (25) on the handle (1).
2. Push the attachment (25) onto the hand-
le (1).
Ensure that the little marking on the attach-
ment (25) sits over one of the two re-
cesses at the upper end of the handle
(1), otherwise the handle (1) and the
attachment (25) will not slot into one
another.

Assembly

Caution! Risk of injury!
- Ensure that you have suficient
space in which to work, and that
you do not endanger other peo-
ple.
- All hoods and protective devices
must be assembled properly be-
fore commissioning.
- Disconnect the mains plug be-
fore changing the setting on the
device

Mount handgrip

The device must only be
operated with the handgrip
mounted.
Depending on the method of working, tigh-
ten the handgrip (
thread on the left (
tion ) or top (
Assemble/set protective
hood/demounting
If the guard cover (9) is engaged in
the position illustrated in
push the whole guard cover against
the tool and turn it at the same time
Adjust the protective hood such that any
sparks or detached parts cannot hit either
the user or any bystanders.
The protective hood must also be positi-
oned such that the sparks cannot ignite
combustible parts, including those in the
surroundings.
Demounting the grinding disc:
1. Press the spindle stop button (
2. Turn the mounting spindle (
the spindle lock ixed the mounting
spindle. Keep and continue to hold
down the spindle lock button (
3. Release the clamping nut (
the chuck key (
the spindle lock button (
4. Take off the locknut (
ter lange (
8) from the spindle lange (
(
GB
1) on to the handgrip
7), right (see illustra-
2) of the device.
16) until
15) with
13). You can release
10).
15), the adap-
14) and cutting disc
IE

,
10).
10)
16).
37