Gastroback Design Kaffeemühle Advanced Plus Bedienungsanleitung Seite 45

IMPORTANT - Before starting the grinder, ensure that there is sufficient free space
left in the storage container for taking the desired amount of coffee powder. We
recommend to empty the storage container completely, before grinding a new
portion. Always ensure to fold the latch of the container lid open for filling the con-
tainer. Otherwise, the grinder may get blocked via coffee powder tailing back in
the powder outlet.
1. Ensure that the appliance is assembled correctly (see: 'Care and Cleaning / Re-
Assembling the Grinder'). Ensure that the settings of the grind size and grind time
are correct (see: 'Selecting the Grind Size' und 'Setting the Amount'). If required,
fill the bean hopper with a sufficient amount of whole coffee beans (see: 'Filling
the Bean Hopper').
2. You should empty the storage container, before grinding a new portion. Close
the storage container via the container lid. Ensure to open the black latch in the
container lid and turn the latch to the well beside the filling hole. Then, place the
storage container onto the powder tray below the powder outlet with the filling
hole orientated to the rear wall of the grinder cavity.
NOTE
You should not operate the grinder without the powder tray. Otherwise, the cof-
fee powder may miss the filling hole of the storage container with a lot of coffee
powder falling out.
3. Connect the appliance to a suited power supply (see: 'Important Safeguards for
Electrical Appliances'). Press the power button for starting the grinder. The grin-
ding process stops automatically when the selected grind time is reached.
4. When the motor stops, unplug the appliance. Remove the storage container.
NOTE
For ensuring optimum coffee flavour, only the required amount of beans should
be ground immediately before brewing. Any excessively ground coffee should be
stored in an airtight container. Select a cold, dark place (e.g. in the refrigerator).
EN
45