Moving Parts - Risk Of Injuries - Gastroback Design Kaffeemühle Advanced Plus Bedienungsanleitung

tric shock. Ensure that the power outlet socket used is always accessi-
ble for unplugging the appliance immediately in case of malfunction
or danger.
• The appliance may not be operated on metal surfaces (e.g. sink) to
avoid risk of electric shock. Do not touch the power plug or the appli-
ance with wet hands, when the appliance is connected to the power
supply.
• DO NOT pour or spill any liquids on or under the housing or on the
power cord or in the bean hopper when the bean hopper is installed
on the grinder chamber. Do not immerse the appliance, power cord,
or power plug in water or other liquids. Do not place the appliance
on wet surfaces. Protect the appliance from splashing water. If liquids
are spilled on or into the appliance, immediately unplug and dry the
appliance and, with all parts disassembled, let it dry naturally for at
least 1 day (see: 'Care and Cleaning').
• Power cords may never be knotted, twisted, strained or squeezed.
Do not let the power plug or power cord hang over the edge of the
table or counter. The power cord may not touch hot surfaces or sharp
edges. Ensure that no one will pull the appliance by the power cord.
Take care not to entangle in the power cord. Always grasp the power
plug, when disconnecting the power cord.
MOVING PARTS – RISK OF INJURIES
Your new DESIGN COFFEE GRINDER ADVANCED PLUS is designed
for grinding coffee beans. For this purpose, the sharp-edged grinding
burrs are rotating in the grinder chamber. Improper handling could cause
severe injuries and damage.
• Do not insert your hands or any foreign objects (e.g. clothes, brushes,
cooking utensils) in the grinder chamber, bean hopper, or the pow-
der outlet, with the appliance connected to the power supply. Always
unplug the appliance before moving the appliance, and before
assembling, disassembling, or cleaning the appliance, and before
removing the storage container.
EN
37