Attaching /Removing / Emptying Dust Collection Box; Emptying The Dust Collection Box; How To Connect/Remove External Dust Extraction; Setting The Rotational Speed - Parkside PEXS 270 C3 Originalbetriebsanleitung

GB MT
Removing sanding sheet:
Remove the sanding sheet (7) from the san-
ding disc (4).
Attaching sanding sheet:
Press the sanding sheet (7) evenly onto the
sanding disc (4).
Ensure that the sanding sheet lies flush and
the holes are placed directly above the ext-
raction openings of the sanding disc (4).
Attaching /removing /
emptying dust collection
box
Attaching the dust collection box:
1. Before connecting, ensure that the dust
collection box (3) is firmly closed.
2. You must keep the dust collection box
(3) slightly slanted when pushing it
on. Slide the dust collection box (3) all
the way onto the connection for dust
extraction (9). The nose of the dust coll-
ection box (3) must be inserted into the
groove (10) of the connector (9).
3. Then tighten the dust collection box (3)
clockwise to lock.
Removing the dust
collection box:
4. Unlock the dust collection box (3) coun-
terclockwise and pull the dust collec-
tion box (3) off.
Emptying the dust
collection box:
5. Open the dust collection box (3) by
slightly squeezing it on the transparent
part and pulling the two parts apart.
The dust box can be opened more ea-
sily by simultaneously pressing together
46
the black part of the dust collection
box from above and below.
Please note the arrows in Fig.
the direction of pressure.
6. Remove the filter insert (8) and empty
it.
7. Re-insert the filter insert (8) and close
the dust collection box (3).
Empty the dust collection box regu-
larly to ensure optimal suction.
How to connect/remove
external dust extraction
Connecting external dust
extraction:
1. Push the external dust extraction adap-
tor (6) as far as it will go on the dust
extraction connector (9).
2. Connect the extraction hose from a
vacuum cleaner (sold separately) to the
external dust extraction adaptor (6).
Removing external dust extraction
1. Remove the extraction hose from the
external dust extraction adaptor (6).
2. Disconnect the adapter for external
dust extraction (6).
If necessary, you can connect the
suction tube of a vacuum cleaner
directly to the device without an
adapter.
Setting the rotational
speed
You can set the rotational speed variable
via the rotational speed selection wheel
(5).
for