Connection Valve; Switching On/Off; Cigarette Lighter Plug; Valve Adapters - ULTIMATE SPEED UMK 10 C2 Bedienungs- Und Sicherheitshinweise

- Insert the open connection valve
the inflatable (if necessary, first remove valve cover of
the inflatable).
- Hold the connection valve and close: push tensioning
lever toward connection valve
8
Connecting with valve adapter
- Push the respective valve adapter into the opening in
the connection valve
- Secure the valve adapter into the connection valve
push clamping lever
Fig. C).
- Insert the valve adapter
able (if necessary, first remove valve cover of the inflat-
able).
Switching on / off:
Switch the device on: on / off switch
Once the desired filling pressure has been reached,
switch the device off: on / off switch
Remove the cigarette lighter plug
12 GB/CY
into the valve of
7
.
7
:
10
.
7
toward connection valve (see
8
into the valve on the inflat-
10
to position "I".
6
to position "0".
6
.
5
Removing the connetion valve:
Connecting without valve adapter
ing lever for the connection valve
8
from the valve of the inflatable.
Connecting with valve adapter
adapter from the valve of the inflatable. Open the clamp-
ing lever of the connection valve
8

valve adapter

10
Note: Air may escape from the valve of the inflatable when
:
7
removing the connection valve
the connection valve
The manometer
specialist facility with a calibrated device after inflating
inflatables where incorrect pressure can be dangerous
(e.g. car tyre).
: Open the clamp-
10
and remove
7
: Remove the valve
10
and remove the
7
.
. Be sure not to remove
7
too quickly.
7
is not calibrated. Therefore seek a
2