Storage; Troubleshooting - Silvercrest SHSS 16 A1 Bedienungsanleitung

5) To replace the rotary brush
broad end onto the drive shaft so that the
rotary brush hooks into place.
6) Then, push the other end into the mount so that
the rotary brush
nozzle.
7) Replace the cover plate and fasten it firmly
into place by pushing the catch towards the
symbol (fig. 4).
Fig. 4

Storage

■ When you are not using the appliance, place
it on the cradle .
■ Place the accessories on the accessory
holders / :
–
Place the crevice tool
nozzle into the holders
–
Place the brush attachment
upper part of the crevice tool
■ Store the appliance in a dust-free and dry
location.
SHSS 16 A1
, first push the
sits straight in the floor
and the upholstery
/ .
onto the
.

Troubleshooting

The appliance is not working.
■ The battery is not charged.
♦ Connect the appliance to the charger
■ The appliance is defective.
♦ Contact the Customer Service department.
The appliance is running but hardly
sucking up any dirt.
■ The battery is not sufficiently charged.
♦ Connect the appliance to the charger
■ The dirt container
♦ Empty the dirt container
■ The HEPA filter is blocked.
♦ Clean the HEPA filter
The appliance will not charge.
■ The charger is not correctly connected to
the socket/mains plug.
♦ Check the connections of the charger
■ The charger is defective.
♦ Contact the Customer Service department.
.
.
is full.
.
.
.
GB │ MT │
45 ■