Storage; Troubleshooting - Silvercrest SHZK 600 A1 Bedienungs- Und Sicherheitshinweise

Pull the HEPA filter
case (Fig . K) .
[ 21 ]
The HEPA filter
[ 22 ]
tapping it . Never wash the HEPA filter with
water .
Rinse the filter case
let it dry for 24 hours .
Insert the HEPA filter
case (Fig . L) .
21 ] [
Insert the filter case
HEPA filter into the dust container
[ 22 ]
(Fig . L) .
Turn the HEPA filter
points to on the filter case
(Fig . M) .
˜ Troubleshooting
Fault
The product does not work .
The suction power is reduced
and the product does not
vacuum any dirt .
The product overheats .
26 GB/IE
out of the filter
22 ] [
can be emptied by
with warm water and
21 ] [
into the filter
[ 22 ]
with the
[ 21 ]
[ 7 ]
clockwise so that
[ 22 ]
21 ] [
Possible cause
The power plug
connected to the socket-outlet .
Dust container
Suction path blocked .
Filter case
21 ] [
clogged .
Filter case
21 ] [
clogged .
Place the dust container lid
container . The clip for opening the dust
[ 7 ]
container lid
[ 23 ]
Insert the dust container
unit . The release button
[ 6 ]
lock in place (Fig . H) .
˜ Storage
Store the product in the original packaging
when it is not in use or hang it on the wall
bracket .
17 ] [
Clean the product before storage .
Store the product at a dry location out of the
reach of children .
Action
is not Connect the power plug
[ 5 ]
socket-outlet .
full . Empty the dust container
[ 7 ]
(see "Emptying the dust
container") .
Check the nozzle
telescopic tube
container
remove them .
or HEPA filter Clean the filter case
[ 22 ]
HEPA filter
and care") .
or HEPA filter Clean the filter case
[ 22 ]
HEPA filter
and care") .
on the dust
1 ] [
must audibly lock in place .
into the motor
7 ] [
must audibly
[ 2 ]
[ 5 ]
[ 7 ]
[ 12 ] [ 14 ] [ 15 ]
and the dust
10 ] [
for blockages and
7 ] [
and the
21 ] [
(see "Cleaning
[ 22 ]
and the
[ 21 ]
(see "Cleaning
[ 22 ]
to a
, the