Skylotec MILAN AGR 2001 Gebrauchsanweisung Seite 4

MILAN / MILAN 2.0
GB
READ AND FOLLOW PROVIDED INSTRUCTIONS! The device must only
be used by SKYLOTEC trained persons. Failure to follow all instructions
may result in serious injury or death.
The device has to be inspected in accordance with the provided manufacturers instruction:
• For periodic inspections. User inspection is visual only. Please follow the detailed service
instructions under point 7.
The device must only be used with original rope type "SKYLOTEC SUPER STATIC ø 9 mm".
sheath slippage (%)
elongation (%)
sheath proportion (%)
core proportion (%)
mass per metre (g/m)
shrinkage (%)
material
Abseiling work
W=m x g x h x n
WARNING: Do not use incompatible rope! Do not alter the length of the rope or add terminations
using knots.
Rope changes may only be carried out by persons who are trained to do so and have the appropriate
authorizations.
WARNING: Avoid descending into electrical, thermal, chemical sources or other hazards.
DO NOT expose rope to sharp edges, abrasive surfaces, sparks, flames or heat.
The device has an automatic breaking system.
The device can be used bi-directional.
This instruction shall be provided to the rescuer and training providers!
4
m: mass (kg)
g: acceleration of gravity= 9,81m/s
h: height (m)
n: number of descents
3
4,7
39,5
60,5
60,7
0,8
PA
2