Skylotec MILAN AGR 2001 Gebrauchsanweisung Seite 15

Milan 2.0
(Active)
1) Attach the rope
to the anchor point
(Passive)
1) Attach the device
to the Anchor point
5) Pull the rope down
and pull it into the rope
guide channel
2) Guide the Rope from
the orange cover plate
over the rope hook into
the rope guides channel
2) Pull the long end
of the rope up
6) Pull the rope up into
the rope clamp which
is integrated in the
housing
3) Pull the rope up
through the rope guide
channel
3) Guide the Rope from the orange cover plate over
the rope hook
7) Push the rope into
the rope clamp
4) Pull the rope down
and push it into the
rope clamp in the
housing
8) Guide the Rope over
the second rope hook
to secure the device,
ready to operate
15
GB