Safety Instructions; Symbols And Icons - Parkside PRT 550 A1 Originalbetriebsanleitung

Noise and vibration values have been
determined according to the standards and
regulations mentioned in the declaration of
conformity.
Noise and vibration values have been
determined according to the standards and
regulations mentioned in the declaration of
conformity.
The stated vibration emission value was
measured in accordance with a standard
testing procedure and may be used to com-
pare one power tool to another.
The stated vibration emission value may
also be used for a preliminary exposure
assessment.
Warning: The vibration emission
value may differ during actual use
of the power tool from the stated
value depending on the manner in
which the power tool is used.
Try to keep the exposure to vibra-
tions as low as possible. Examples
of measures to reduce vibration
exposure are the wearing of gloves
when using the tool and limiting the
working hours. For this purpose all
parts of the operating cycle have to
be considered (for example, times
when the electric tool is switched
off and times when it is switched on
but running without any load).

Safety instructions

Ensure that the safety instructions
are observed when operating the
trimmer.

Symbols and icons

Symbols on the trimmer
WARNING!
Carefully read these Operat-
ing Instructions.
Wear goggles and ear de-
fenders.
After turning off the ap-
pliance, the cutting disk
will keep revolving for a
couple of seconds. Keep away
from your hand and feet.
Do not expose the trimmer to
moisture. Do not work when
it is raining and do not cut
wet grass.
Keep by-standers well
away. They could be
injured by flung out
objects.
Danger due to materials
blown out of machine!
Remove persons in the vicin-
ity from the danger area.
Unplug the connector im-
mediately if the connection
cable is damaged.
Always remove the mains
plug during maintenance
work.
Noise level rating L
GB MT
in dB
WA
57