Parkside PRT 550 A1 Originalbetriebsanleitung Seite 60

GB MT
g) If devices are provided
for the connection of dust
extraction and collection
facilities, ensure these are
connected and properly
used. Use of dust collection can
reduce dust-related hazards.
4) POWER TOOL USE AND CARE
a) Do not force the power
tool. Use the correct power
tool for your application.
The correct power tool will do
the job better and safer at the
rate for which it was designed.
b) Do not use the power tool
if the switch does not turn
it on and off. Any power tool
that cannot be controlled with
the switch is dangerous and
must be repaired.
c) Disconnect the plug from
the power source and/or
the battery pack from the
power tool before making
any adjust -ments, chang-
ing accessories, or storing
power tools. Such preventive
safety measures reduce the risk
of starting the power tool acci-
dentaIly.
d) Store idle power tools out
of the reach of children
and do not allow persons
unfamiliar with the power
tool or these instructions
to operate the power tool.
Power tools are dangerous in
the hands of untrained users.
e) Maintain power tools.
Check for misalignment
or binding of moving
60
parts, breakage of parts
and any other condi-
tion that may affect the
power tool's operation.
If damaged, have the power
tool repaired before use. Many
accidents are caused by poorly
maintained power tools.
f) Keep cutting tools sharp
and clean. Properly main-
tained cutting tools with sharp
cutting edges are less Iikely to
bind and are easier to control.
g) Use the power tool, acces-
sories and tool bits etc. in
accordance with these in-
structions, taking into ac-
count the working condi-
tions and the work to be
performed. Use of the power
tool for operations different
from those intended could result
in a hazardous situation.
h) Ensure that the vents are free of
soiling.
i) Disconnect the mains
plug/remove the re-
chargeable battery from
the device
- whenever the user no longer
remains in the vicinity of the
machine.
- before the removal of blockages.
- before checking, cleaning or
working on the machine.
- after touching a foreign body in
order to check the machine for
damage.
- for an immediate check if the
machine begins to vibrate ex-
cessively.