Setting Up The Projector; Setting Up From The Projector; Setting The Password - Sony VPL-PX15 Bedienungsanleitung

Setting Up the Projector

Basic setups such as IP address and wireless LAN
settings are necessary for networking operations of the
projector. You can set them up either from the
projector or a computer connected to the same LAN.
Before setting up
x For VPL-PX15 and VPL-FX50
• Turn on the projector with the #/ 1 key on the
supplied Remote Commander or control panel of the
projector.
• Confirm that INPUT-B FUNC. (VPL-PX15) or
INPUT-C FUNC. (VPL-FX50) in the INSTALL
SETTING menu is set to ON.
• Press the INPUT key on the supplied Remote
Commander or control panel of the projector to select
INPUT B (VPL-PX15) or INPUT C (VPL-FX50).
The Network Projector window opens.
• Set the PJ/NETWORK select switch on the Remote
Commander to NETWORK.
• When you are setting up the items from the projector,
using the Net Mouse function is convenient.
For details on the Net Mouse function, see page 8 (GB).
• You can also set up from the projector using the
screen keyboard displayed on the projector's screen,
and operate with the supplied remote commander.
For information on the screen keyboard, see page 35 (GB).
x For VPL-FE110U/M
• Confirm that the INPUT C/RS-232C/RS-422A select
switch is set to INPUT C.
• Turn on the projector with the ON key on the
supplied Remote Commander or control panel of the
projector.
• Press the INPUT SELECT key on the supplied
Remote Commander or control panel of the projector
to select INPUT C. The Network Projector window
opens.
• When you are setting up the items from the projector,
using the Net Mouse function is convenient.
For details on the Net Mouse function, see page 8 (GB).
• You can also set up from the projector using the
screen keyboard displayed on the projector screen,
and operate with the remote commander or the
connected mouse and keyboard.
For information on the screen keyboard, see page 35 (GB).

Setting Up from the Projector

Setting the password

You can set a password for protection against access
from remote network users.
1
From the Start menu, click Control Panel in the
Network Projector window.
2
Double-click the Password icon.
The Password Properties dialog box appears.
Password Properties
Administrator
Name: _ root
User
Name: _
3
Specify the Password for Administrator, then enter
the same password again in the Confirm password
text box for Administrator.
The Name of Administrator is preset as "root" at
the factory. It cannot be changed.
4
Specify the Name and Password for User, then
enter the same password in the Confirm password
text box for User.
When you are required to enter the password for
Administrator or User while you are operating the
projector from a computer, enter the Name and
Password which you set in steps 3 and 4.
Setting up the network configuration
Setting up the network configuration, such as IP
address setting, is necessary for building a LAN
connection. The IP address of the projector will be
displayed on the task bar of the Network Projector
window of the projector.
If the connection environment is changed, you need to
set up the network configuration again.
For details, contact your network administrator.
_ Password: I
Confirm password: _
_ Password:
Confirm password: _
9
(GB)